Mains Connection - Upright 8000 Serie Manual Del Usuario

This machine variant requires a power supply from a fixed source.
Prior to operating the generator, follow these simple guidelines;
a) Ensure the power supply being attached is the correct voltage.
b) Ensure the power supply being used is being supplied via an
appropriate power extension.
1. To connect to a mains supply, simply remove the socket's protection cap.
All extensions must be a minimum of 2.5mm², and no longer than
!
10m, due to possible voltage drop, which will damage the motor.
2. Connect an appropriately rated power extension.
3. Ensure the voltage output matches the appliance intended for use.
4. Ensure that the connection is secure before use.
Blue sockets is 240V output. Yellow sockets is 110V output.
!
TL49K
APPENDIX
508159-000

Mains connection

33