Storing Channels automatically
You can scan for the frequency ranges available to you (and availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.
1. Press the menu button to display the menu.
Press the or button to select "Channel", then press the enter
2. Press the enter
3. Select the appropriate country by pressing the or button.
Press the enter
4. Press the or button to select "Auto Store", then press the enter
5. P ress the enter
The TV will begin memorizing all of the available channels.
enter
Press the
6. After all the available channels are stored, the "Sort" menu appears.
Storing Channels manually
You can store up to 100 channels, including those received via cable networks.
When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to identify.
1. Press the menu button to display the menu.
Press the or button to select "Channel", then press the enter
2. Press the or button to select "Manual Store", then press the enter
3. Press the enter
4. To assign a programme number to a channel, find the correct number by pressing the or button
and then press the enter
You can also set a programme number by pressing number buttons on the remote control.
If you want to reset this feature...
1. Press the menu button to display the menu.
Press the or button to select "Setup", then press the enter
2. Press the enter
3. The message to "Start Plug & Play" is displayed.
- Storing Channels automatically
- Storing Channels manually
button to select "Country".
button to confirm your choice.
button.
button at any time to interrupt the memorization process and return to the "Channel" menu.
button to select "Programme".
button.
button again, to select "Plug & Play".
English-8
button.
button.
button.
button.
button.