assigning Channels names
Fine tuning Channel reception
Channel names will be assigned automatically when channel
information is broadcast.
These names can be changed, allowing you to assign new names.
1. Press the menu button to display the menu. Press the or button
to select "Channel", then press the enter
2. Press the or button to select "Name", then press the enter
3. If necessary, select the channel to be assigned to a new name by
pressing the or button. Press the enter
The selection bar is displayed around the name box.
4.
to...
Select a letter, number or symbol
Move on the next letter
Move back the previous letter
Confirm the name
The characters available are :
Letters of the alphabet (A~Z) / Numbers (0~9) / Special characters ( -, space)
5. Repeat steps 3 to 4 for each channel to be assigned to a new name.
6. Press the exit button to exit.
Use fine tuning to manually adjust a particular channel for optimal
reception.
1. Use the number buttons to directly select the channel that
you want to fine tune.
2. Press the menu button to display the menu.
Press the or button to select "Channel",
then press the enter
3. Press the or button to select "Fine Tune", then press the
enter
button.
4. Press the or button to adjust the fine tuning.
Press the enter
5. Press the exit button to exit.
Fine tuned channels that have been saved are marked with an asterisk "
right-hand side of the channel number in the channel banner. And the channel number
turns red.
To reset the fine-tuning, select "Reset" by pressing the or button and then press the
enter
button.
English-
then...
Press the or button
Press the button
Press the button
Press the enter
button.
button.
button.
button.
button.
button
*
" on the