MyBinding SEAL 54 EL Manual De Instrucciones página 14

5. Lock machine in place with foot by stepping on the front caster's locking mechanisms. (See figure
6.)
Note: An uneven floor may affect lamination quality. In the case of an uneven floor, please contact
technical service for the machine leveling option.
WARNING:
MACHINE MUST BE SECURED IN PLACE BEFORE USING.
OFF
Figure 6
Locking Lever
WARNING:
MAKE SURE THE POWER SUPPLY CABLE AND/OR THE EXTENSION CABLE IS
NOT BLOCKING YOUR WAY AROUND THE MACHINE.
3.7 Transport
The machine can be transported on a smooth surface on its casters.
CAUTION:
Unlock the wheels before moving the machine.
When moving the machine on rough surfaces or over long distances, use the original pallet and
packing material and move it with a pallet truck or forklift.
ON
9