Descargar Imprimir esta página

CLOROX 86900 Manual Del Usuario página 8

Desinfectante con vapor

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning
1. Unplug. Allow to cool. Discard any remaining water from Water
Reservoir.
2. Wash all removable parts in hot, soapy water. Rinse and dry.
3. Wipe Base with a damp cloth and dry.
To Descale Water Reservoir:
Water Reservoir buildup is a natural process caused by minerals in water.
You may notice brown stains or whitish powder, which is caused by heating/
boiling water. To remove discoloration or scale/lime deposits left on Water
Reservoir, follow steps 1–4 below.
1. Pour 100 mL (3.4 oz) white vinegar to MAX Fill Line in Water Reservoir.
Do not steam any items with vinegar in Water Reservoir.
2. Place Lid onto Base with Steam Vents facing back.
3. Plug into outlet. Press Steam ( ) Button to begin descale operation.
Steam Sanitizer and Indicator Light will automatically turn off when
descaling is complete.
4. Cool completely. Rinse Water Reservoir and add 100 mL (3.4 oz) water
to MAX Fill Line in Water Reservoir on Base. Repeat steps 1–3 to remove
any remaining vinegar in Steam Sanitizer.
5. Follow these steps when deposits appear. If you have hard water,
buildup will appear faster.
Troubleshooting
Unit will not turn on.
Check to ensure unit is plugged in.
Press Steam ( ) Button and make sure Indicator Light is on.
Ensure enough water has been added for Full (100 mL [3.4 oz]) or Delicate
cycle (40 mL [1.35 oz]).
8
w WARNING
Electrical Shock Hazard.
Disconnect power before cleaning. Do not immerse cord, plug, or
base in any liquid.
To Nest for Storing:
NOTE: Ensure Water Reservoir is
drained of any water and dried before
storing.
Place Removable Tray onto Base and
add Pegs. Place Lid onto Base and slide
Extender over Lid.
Steaming takes too long/little or no steam.
Heating element has accumulated deposits. See "To Descale Water
Reservoir" section on this page.
I need to stop sanitizing mid-cycle.
The only way to stop sanitizing once the cycle has begun and before all
water is evaporated is to unplug the product. Let steam dissipate before
opening. Cycle will resume when product is plugged in again.

Publicidad

loading