Premier ED-5515MM Manual De Instrucciones página 13

ASSEMBLY INSTRUCTIONS
1.Unpack the unit,and place it on the ground.Discard the plastic sleeve.Pull the cord tight through the
pole stand as in Figure 1.
2.Insert upper and lower tubes and press the spring bulge to ensure both tubes are securely placed,as
in Figure 2.
3.Insert the connector piece into the stand base.Align pole and connect by screwing nut as Figure 3.
4.Place the cable in the base as Figure 4.
5.Your Mosquito Trap is now ready to be connected to the electrical outlet.
P-4