Publicidad
Idiomas disponibles
Idiomas disponibles
● Temperature unit setting: Switch off the fridge and hold
displays. Switch to E5 by pressing
Fahrenheit. Factory setting is °C.
● Reset: Switch off the fridge and hold
E1 mode, hold
6
● Unplug the device before cleaning to avoid an electric shock.
● Use a wet cloth to clean the device, then dry it.
● Do not soak the device in water.
● Do not use abrasive cleaning products as this could damage the device.
When the device is off for a long time, follow these steps:
● Turn off the power and remove the plug.
● Remove all items from the appliance.
● Wipe excess water from the fridge using a soft cloth.
● Put the appliance in a cool and dry place.
● Leave the lid slightly open to prevent any odours.
Humidity can form frost on the inside of the device or on the evaporator. This reduces the
cooling capacity. Defrost the device to avoid this.
● Switch off the device.
● Take out the contents from the device.
● Keep the lid open.
● Wipe off the defrosted water.
Never use hard or sharp tools to remove ice or loosen objects that are
frozen in place.
again, then press
at the same time for three seconds to reset.
for three seconds until E1
or
for three seconds until E1 displays. When on
to switch to Celsius or
Publicidad
