Publicidad
INSTALLATION
1. Pieces you need to assemble the baby walker
Seat pad, 4 wheels, musical tray, 6 brakes, baby walker chassis.
2. Press the wheels into the base of the baby walker.
3. To adjust the seat pad to the chassis of the baby walker (upper part)
adjust the 4 pins on the rear part of the seat pad, once you put them
on the chassis, adjust the front part of the seat pad on the chassis.
4. Put the tray on the chassis with the 2 plastic hooking which you
must introduce on the chassis, so the musical tray cannot move.
5. You have to press in order to insert the wheels on the base of the
baby walker and also the 6 brakes have to be inserted on the base.
6. The baby walker has got two rotating wheels and two fixed rear
wheels.
7. Following the above mentioned steps, the baby walker will be as-
sembled and ready for being used.
This baby walker is approved to regulation EN1273:2005 and
EN62115:2005.
16
Publicidad
