Specifications; Fcc Compliance Information; Fcc Compliance Statement; Warranty - Beurer BY 52 Manual De Instrucciones

The temperature on the display
does not increase once the warm-
ing process is started; the device
switches itself off after a while.
Contents are not warm enough at
the end of the warming process.

9. Specifications

Type
Voltage
Power Consumption
Heating Time
Keep Warm Temperature
These specifications are subject to change without notice for purpose of improvement.

10. FCC Compliance Information

Baby Bottle and Food Warmer BY 52
Responsible Party – U.S. Contact Information:
Beurer North America LP
1 Oakwood Boulevard, Suite 255
Hollywood, FL 33020
United States
1-800-536-0366
info@beurer.com

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.

11. Warranty

Limited Lifetime Warranty For Original Purchaser
Your Beurer Baby Bottle and Food Warmer, model BY 52, is warranted to be free from defects in materials and
workmanship for the life of the product under normal conditions of intended use and service. This warranty extends
only to the original retail purchaser and does not extend to retailers or subsequent owners.
No water in the Base.
Not enough water in the Base.
BY 52
120 VAC / 60 Hz
80 watts
3 - 18 mins
95 °F - 185 °F (35 °C - 85 °C)
6
Unplug the power cord, let the
Bottle Warmer cool down, then fill
the Base with water and restart the
warming process.
Unplug the power cord, let the
Bottle Warmer cool down, then fill
the Base with sufficient water and
restart the warming process.