GRE CSPAN Manual De Instrucciones página 5

2. Installation
2.1 Filter element assembly and body parts assembly
Assemble the body parts in the direction of the arrow.
1
2.2 Assembly of vacuum head
Insert the entire vacuum head directly into the Front
filter.
Note: the product can be connected with
handle (A) or a standard telescopic pole (B)
(telescopic rod (B) is optional and needs to be
purchased additionally).
3. Power ON/OFF
3.1 Press and hold the power switch button of the
cleaner for 2-3 seconds to start the machine.
Please put the product into water for operation to
prevent oil seal failure when the product idles.
3.2 When the switch button is pressed again, the
cleaner shuts down.
2
2.3 Handle assembly
(1) Handle assembly
This handle is used to clean walls, steps, seats and
corners, as shown in figure "A".
(2) Assembly of telescopic pole (not included)
Cleaner can be connected to a standard telescopic
pole, as shown in figure «B».
3
CLOSE
ON/OFF
4
A
B