Style selections Y95805 Manual Del Usuario página 7

ASSEMBLY INSTRUCTIONS (CONTINUED)
3. Attach the back cap (C) to the opening on the
back of the fountain (A), making sure to feed
the pump (B) & light's power cords through the
small notch on the back cap. Turn the back cap
(C) clockwise to secure.
4. Fill fountain (A) with water, making sure the
pump (B) is fully submerged, 5 gallons of water
is suitable. Then, plug pump power cord into
nearest outlet.
CAUTION:
Be careful not to spill water onto the plug of the
pump. DO NOT allow the pump to run dry!
3
4
7