Publicidad
Idiomas disponibles
Idiomas disponibles
EN
C A R E & M A I N T E N A N C E
Cleaning the Tower Fan
•
Unplug before cleaning.
•
Wipe the outside of the tower fan with a soft,
dry cloth. If necessary, wipe the housing with
a damp cloth, then immediately dry.
•
Use a vacuum, duster, or compressed air to
clean the inside of the tower fan.
•
If necessary, use a Phillips screwdriver to
remove the back cover and clean the inside
of the tower fan. [Figure 3.1]
Note:
•
Make sure the tower fan is turned off
before removing the back cover.
•
Clean the internal parts with a dry cloth.
•
Do not clean with abrasive chemicals or
flammable cleaning agents.
T R O U B L E S H O OT I N G
Problem
Tower fan will not
turn on or respond to
button controls.
Tower fan makes an
unusual noise while
the fan is on.
Tower fan randomly
turns off.
If your problem is not listed, please contact
8
Possible Solution
Plug in the tower fan.
Check to see if the power cord is damaged. If so, stop using the
tower fan and contact Customer Support (see page 9).
Plug the tower fan into a different outlet.
Tower fan may be malfunctioning. Contact Customer Support (see
page 9).
Make sure the tower fan is operating on a hard, flat, level surface.
Tower fan may be damaged, or a foreign object may be inside. Stop
using the tower fan and contact Customer Support (see page 9). Do
not try to repair the tower fan.
Tower fan is malfunctioning. Stop using the tower fan and contact
Customer Support (see page 9).
Replacing the Remote Control
Battery
1.
Insert a coin/button battery into the slot
and rotate counterclockwise to remove
the battery compartment. [Figure 3.2]
2. Remove the old battery.
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
4. Replace the battery compartment.
Storage
If not using the tower fan for an extended
period of time, cover the tower fan and
store in a cool, dry place to avoid moisture
damage.
Customer Support (see page
9).
Publicidad
