PRO 2200 A
WARNING !
Operation is only allowed with a safety switch
against stray current (RCD max. stray current of
30mA).
Electric connection to a socket.
If the pump is in operation, neither people nor animals
can be present or plunged in the pumped liquid (e.g.
pools, cellars, etc.).
The temperature of the drained liquid must not
exceed +35 °C.
The pump must not in any case run without fillings.
Do not leave the pump unattended while in operati-
on in order to prevent subsequent damages caused
by eventual malfunctions. Make sure to disconnect
the device from the grid if you do not plan on using it.
If the pump is used in ponds, wells, etc. and appropri-
ate pumping stations, standards valid for pumps in
the given country must unconditionally be observed.
The user is responsible to third parties if pump (dum-
ping stations, etc.) is used.
Protect the feeder cable from excessive temperatures,
oil and sharp edges.
To avoid danger, a damaged mains supply pipe must
be replaced by the manufacturer. Do not under any
circumstances attempt any repair yourself.
Requirements for operating staff
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Training: Using the appliance only requires
corresponding training by a professional or the
Operating Instructions. No special training is
necessary.
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. If you seek help, state the
following pieces of information: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
SYMBOLS
WARNING/CAUTION!
WARNING - Read the operating instruc-
tions to reduce the risk of injury.
Machine to be always unplugged before any
adjustment and servicing work on it.
Staying in the transportation medium
prohibited
Warning against dangerous voltage
AC Current
Max. immersion
V
Voltage
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
CE marking
ENGLISH
11