Descargar Imprimir esta página

Beamz professional Pandora 500 TTL Laser RGB Manual De Instrucciones página 6

Publicidad

UNPACKING INSTRUCTION
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for
inspection if any parts appear damage from shipping or the package itself shows signs of mishandling. Save the
package and all packing materials. In the event that a fixture must be returned to the factory, it is important that the
fixture be returned in the original factory box and packing.
Content:
1pcs Laser projector
1pcs Remote
1pcs Power cable
1pcs Manual
set Keys
LASER SAFETY
Before proceeding any further, please read the following safety page very carefully and it could help you avoid
dangerous and hazardous situations which could lead to serious injury or property damage. Any laser system
classified as a Class 4 laser must be used with caution only by professionals.
Make sure you follow these basic laser safety rules:
1. Never look directly into a laser beam.
2. Never look directly into laser aperture if the laser system is switched on.
3. Be aware that lasers can burn the eye retina, skin or cause fires if not used properly.
4. Never perform Audience Scanning, that's when laser beams and effects hit an audience directly. Always
project with the laser above audience head level, at least 3m above floor level and 2.5 meters of horizontal
separation is required between laser light and audience or other public spaces.
5. When performing outdoors, avoid pointing the laser at aircrafts, buses, trains, etc.
6. Never leave the laser system unattended when it's switched on.
7. Always check for reflective surfaces within the laser range, these can be very dangerous (i.e. mirror behind
the bar in a club could bounce the beam into bar attendant's eye).
6

Publicidad

loading

Este manual también es adecuado para:

152.994