Brockhaus Heuer C97542 Manual De Instrucciones página 18

Assembly instructions for the HEUER collapsi-
ble-lift and HEUER collapsible
When not in use the vice can be folded under the workbench, thus freeing the whole workspace
for other work. Furthermore, when in a working position, the vice of the HEUER collapsible-lift is
height adjustable by approx. 175 mm and can be rotated by 360°.
Assembly:
Push the HEUER collapsible-lift or HEUER col-
lapsible under the workbench and against the
contact surface. In order to ensure that the
stop plate of the device is flush to the top of
the workbench, if necessary use washers or
other as shim. Secure in this position with three
through-going coach bolts M12 and nuts.
Then mount vice.
Operating:
a) Height adjustment
(only HEUER collapsible-lift):
The vice can only be adjusted in height and ro-
tated if the knurled thumb screw (left) is pulled
tight and the clamping is released by the safety
clamping lever.
Attention: Do not release clamping when loaded!
The safety clamping lever is not frictional in the
rest position. To activate, move lever in direction
of device. After releasing the clamping with the
safety clamping lever the vice can effortlessly
be put into the desired work position. A gas
shock absorber - specially tuned to the weight
of each vice - makes the vice practically weight-
less. In optimum work position the vice is then
adjusted with the safety clamping lever.
b1) Folding down the HEUER collapsible-lift:
Before collapsing the vice must be brought
into the lowest position and in a right angle to
the workbench. Adjust in this position with the
safety clamping lever (right) and unscrew the
18
knurled thumb screw (left) to the stop.
Remark: The vice can only be collapsed under
the workbench in this position. Because of the
integrated safety system the height adjustment
is blocked even if the safety clamping lever is
not tightened or not tightened sufficiently.
Because of the height adjustment and rota-
tional options the HEUER Collapsible Lift can
be adjusted to the height of the user, the size of
the workpiece and the necessary task, making
working more comfortable.
b2) Folding down the HEUER collapsible:
Unscrew the knurled screws as far as possible
and then fold down the device. To lock the de-
vice in the intended position, repeat this pro-
cess in a reverse order.
**