Publicidad
Idiomas disponibles
Idiomas disponibles
Child Lock
The Child Lock function locks the washer door to prevent children from climbing into and suffocating inside
the drum.
To activate Child Lock
• Press and hold both Temp. and Rinse for 3 seconds. Then, press and hold Start/Pause (Hold to Start) to
activate. The door locks, and the Child Lock indicator turns on.
To deactivate Child Lock temporarily
• You can deactivate Child Lock temporarily for 1 minute. To do this, press and hold both Temp. and Rinse
for 3 seconds. The door is unlocked for 1 minute and the Child Lock indicator blinks.
NOTE
• If you open the door 1 minute after deactivating Child Lock, an alarm sounds for up to 2 minutes.
• If you close the door within 2 minutes, the door locks and Child Lock is reactivated. If you do not close
the door or the door is not properly closed, the alarm keeps sounding for 2 minutes.
• To add laundry after activating Child Lock, deactivate Child Lock or restart the washer.
To cancel Child Lock
• Press and hold both Temp. and Rinse for 6 seconds. The door unlocks, and the Child Lock indicator turns
off.
Sound Off
You can turn the alarm sound on or off. When the alarm is off, the cycle completion melody and the power-
off beep will not sound. However, the other sounds stay active.
• Press Sound Off to turn the alarm on or off.
• Your setting will be kept even after you turn off and then restart the appliance.
DOWNLOADED cycle
You can choose from more cycles available on the SmartThings app on your smartphone.
1. On your smartphone, select the DOWNLOADED cycle.
2. Press Power on your washer.
3. Turn the Cycle Selector to DOWNLOADED.
4. Press and hold Start/Pause (Hold to Start).
Untitled-4 41
English 41
2023-08-07
12:16:55
Publicidad
