Costway GT4076 Manual Del Usuario página 4

Step 4: Repeat above step to assemble other 6 cross braces (Part E). The
assembly completed picture is as follows (See figure 6)
Figure 6
Cross Braces
Step 5: Repeat above step again to assemble two single cross braces (Part C) at
the front and back of the trellis. Position see figure 7.
Figure 7
08
Cross Braces
Short Cross
Brace: C
Angel
Support
Step 6: Put the assembled frame down
carefully, and Insert the 6 stakes (Part D) into
the other side of the 6 angled tubes（Part B）
(See figure 8). Put the product back upright
Netting
after installation.
Cross
Braces
Staked
Support
Figure 8
Step 7: Unfold the net (Part H) carefully and
spread it over to the assembled frame of trellis.
(Ladder needed if necessary) Fix securely the
net by the hooks on the ends of the cross
braces. Or you can use some extra nylon cable
ties (not provided) to fix the net if necessary.
(See figure 9)
Step 8: Instructions for using rotating hole rod(I)
Use the rotating hole rod(I) to drill a hole at least 12-14 inches deep in the soil in
advance. Press the 6 stakes into the ground at least 12-14 inches, and make sure
it is secured.
Step 9: Choose a desired location to place your Arched Trellis which is to keep
away from high wind and keep out of reach of young children and pets.
That's finish your assembly, enjoy your gardening.
Figure 9
Netting
Cross
Braces
Hooks
09