LD Systems QTP 8 Manual De Usuario página 5

LED
9
Multi-colour indicator LED (for future use).
THREAD
10
Thread for fastening the mounting plate (mounting plate and locking screw included).
INSTALLATION
Make sure that the flush-mounted box is deep enough (connection terminal plus Ethernet connector).
RECOMMENDATION: Mount the touch panel in landscape format with the locking screw
The mounting plate of the QTP8 touch panel is compatible with type 86, EU type and US type flush-mounted boxes. Installation of the touch panel
only by authorised personnel and electricians. No liability is assumed for the mounted flush-mounted box and its function. Inspection by qualified
personnel is required.
Loosen the locking screw from the mounting plate, remove the mounting plate from the touch panel and fix it to the corresponding
A
flush-mounted box. Now make the cable connections with the touch panel. Place the touch panel on the mounting plate so that the two pins on
the left side of the mounting plate engage in the corresponding recesses in the touch panel, slide the panel about one centimetre to the right
and secure the connection with the previously loosened locking screw.
HOLE DISTANCE (mm)
A
pointing to the right on a suitable location on a wall.
A
A
A
5