EFALOCK Professional SYNFONIA Instrucciones De Uso página 10

Instruction manual:
▷
Make sure that your hands are completely dry before connecting the device to the
power supply.
1. Move the on/off switch from 0 to I. (In fig. to 1.)
2. Settings: The display shows which settings you are using (in Fig. Item 6)
a ) Air velocity set with keys +/- (in fig. to 2.)
b) Temperature set with keys +/- (in fig. to 3.)
3. Locking function:
dial buttons can be locked. To do this, click the slider
air function continues to function. (in Fig. 4.)
4. Cold air function: Press and hold the COLD SHOT button (in Fig. to 4.) To
deactivate it, release the button. When the cold air function is active, the hair dryer
blows cold air regardless of the temperature setting.
5. Magnetic attachments (in Fig. to 7.): The attachments are held in place
magnetically and can be easily attached (see Fig. at 6.). Change the attachments
only when they have cooled down.
CLEANING, CARE & STORAGE
▷ Switch off the device and disconnect it from the power supply before
maintenance. Clean only when the unit has cooled down!
Regular filter cleaning:
▷ ATTENTION: The high-performance motor is protected by the air inlet filter (in
Fig. to 5.). It is therefore absolutely necessary to clean the filter immediately when
cleaning indicator 888 appears in the display. This is the only way to protect the
motor, maintain correct functioning of the unit and guarantee a long service life.
The accumulation of dirt due to improper cleaning of the filter can cause damage
to the motor!
14102472_SYNFONIA_IM.indd 10 14102472_SYNFONIA_IM.indd 10
soft easy
60 °C 80 °C
After setting the desired temperature and air flow speed, the
medium strong
100 °C 120 °C
ENGLISH
slide (Figure 1.) The cold
01.03.23 07:37 01.03.23 07:37