Publicidad
Idiomas disponibles
Idiomas disponibles
Note: Remove all packaging, including straps, before using the grill
Match light
1.
If the burner will not light after several attempts then the burner can be match lit, before using the
match allow 5 minutes for any accumulated gas to dissipate.
2.
Clip a paper match on one end of the lighting rod.
3.
Light match.
4.
Hold lighting rod and insert lighted match right next to the burner ports or ceramic file.
5.
Push and turn the designated control knob to
6.
Burner should ignite immediately.
Grill Lighting Instructions
1
Make sure the lid is open.
Push and turn Main Burner knob slowly to
2
at the same time, push the electronic ignition button.
Keep knob pressed in until the burner is lit.
If burner does not light within 5 seconds, turn the knob
3
to OFF and repeat the lighting instruction.
If burner does not light up after step 3, turn the knob to
4
OFF, wait 5 minutes, and repeat the lighting procedure
or light by match.
/HIGH.
11
continued
/HIGH ,
Publicidad
