Publicidad
Idiomas disponibles
Idiomas disponibles
Loading / Removing Brad Nails
WARNING
others when loading nails .
could result in possible serious personal injury.
WARNING
with this tool .
The use of any other nails can
result in tool malfunction, leading to serious
injuries.
WARNING
trigger activated .
possible serious personal injury.
To Load Brad Nails (Fig . 5a & 5b)
a. Remove the battery pack from the tool, if
attached.
b. With the nose of the tool pointed away from
you, squeeze the magazine release button
located at the rear of the magazine and
slide the magazine open.
c. Place brad nails in the channel with nail tips
pointing left and resting on the left side of
the channel.
d. Push the magazine closed until it securely
snaps into place.
e. Make sure that the magazine is securely
locked in place.
f. Reattach the battery and restart the nailer by pressing the trigger switch.
NOTE: You can observe the number of remaining nails through the nail indicator windows and
load more nails as needed.
To Remove Brad Nails
a. Remove the battery pack from the tool.
b. Squeeze the magazine release button located at the rear of the magazine and slide the
magazine open.
c. Remove the nails.
d. Close the magazine and make sure that it is securely locked in place.
14
Keep the tool pointed
away from yourself and
Failure to do so
Use only the nails
recommended for use
Never load nails with the
workpiece contact or
Doing so could result in
Fig. 5a
Nail Indicator
Windows
2
Magazine-release
Button
Fig. 5b
Nails
Magazine
1
3
4
Publicidad
