Kohler Portrait K-2272 Guia De Instalacion página 4

All manuals and user guides at all-guides.com
2. Install the Lavatory
Install the faucet and drain to the lavatory according to the
manufacturer's instructions.
Drill mounting holes for the 3/8" bolts (provided) at the marked
locations on the wall.
CAUTION: Risk of product damage. Do not overtighten the
hardware. Overtightening may damage the product.
Position the lavatory on the bolts.
Install rubber washers, metal washers, and nuts on the bolts.
Hand tighten only at this time.
Verify that the lavatory is level. Adjust if needed.
Carefully tighten the nuts until the lavatory is secure to the wall.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the instructions
packed with the faucet.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
1018371–2–A 4 Kohler Co.