Publicidad
Idiomas disponibles
Idiomas disponibles
B2
Removing the safety guard. (See Fig B3)
B3
EN
1. Remove the screws and release the safety guard.
Disassembly and assembly of the skirt and line-
cutting blade
Assembling the skirt and line-cutting blade. (See Fig
C1,C2)
C1
10
1
2
1
1
1
2
1
C2
1. Slide the skirt along the bottom of the safety
guide until the skirt reaches the end of safety
guide.
2. Place the line-cutting blade into the position of
the skirt. Tighten the screws until it is securely
positioned in place.
Removing the skirt and line-cutting blade.(See Fig
C3)
C3
1. Insert the stop pin into the hole of the skirt as
shown and remove the skirt along the safety
guard.
Disassembly and assembly of the trimmer
head
WARNING! A damaged or loose cutting
attachment head may vibrate, crack, break
or come off the brush cutter, which may result in
serious or fatal injury or property damage. Make
sure the trimmer head are properly and securely
tightened and in good condition before starting
work.
1
1
Publicidad
