Nevir NVR-6231 MDG25 Manual De Instrucciones página 25

Operation Instructions
1. Clock Setting
When the microwave oven is electrified, the screen will display "0:00", buzzer will ring once.
1) Press " Clock/ Kitchen Timer " once to select clock function, the hour figures will flash.
2) Turn " " to adjust the hour figures, the input time should be within 0--23.
3) Press " Clock/ Kitchen Timer ", the minute figures will flash.
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
5) Press " Clock/ Kitchen Timer " to finish clock setting. ":" will flash, and the time will light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press "
will go back to the previous status automatically.
2. Microwave Cooking
Press " Microwave " the screen will display "P100". Press " Microwave
or turn " " to choose the power you want, and "P100", "P80", "P50", "P30" or
"P10" will display for each added press. Then press " Start/+30Sec./Confirm
confirm, and turn "
" Start/+30Sec./Confirm " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1) Press " Microwave " once, the screen displays "P100".
2) Press " Microwave " once again or turn"
3) Press " Start/+30Sec./Confirm " to confirm, and the screen displays "P 80".
4) Turn " " to adjust the cooking time until the oven displays "20:00".
5) Press " Start/+30Sec./Confirm " to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min
1---5 min
5---10 min
10---30 min
30---95 min
" to s et cooking time from 0:05 to 95:00. Press
: 5 seconds
: 10 seconds
: 30 seconds
: 1 minute
: 5 minutes
Stop/Clear
" to choose 80% microwave power.
", the oven
" repeatedly
" to
25