Publicidad
Idiomas disponibles
Idiomas disponibles
dry before reconnec ng it to the power supply.
•
Do not use abrasive or chemical cleaning agents.
•
Do not immerse the heater in water or any other liquid. Do not allow
water to enter the heater.
•
Clean grills and air outlet regularly.
Replacing the light bulb
Tool required: a Philips screwdriver, not supplied
E14 Candle light bulb: 40W
WARNING: Ensure that the heater is unplugged before replacing the
light bulb.
1.
Remove the 4 screws from the light bulb cover of the heater.
2.
Remove the light bulbs by turning them an clockwise.
3.
A ach the new light bulbs to the heater by turning them clockwise.
4.
Replace the light bulb cover and secure with the 4 screws.
5.
Plug in the heater and follow opera on steps to operate the heater.
NOTE: If the simulated flame effect is dim or does not operate properly
at first, please ensure that the light bulbs are properly secured in the
light bulb sockets.
EN6
Publicidad
