Descargar Imprimir esta página

KitchenAid 860-0028 Instrucciones De Instalación Y Manual De Uso Y Cuidado página 33

Publicidad

Idiomas disponibles

Idiomas disponibles

Lighting the Side Burner
1.
Open the side burner cover. Do not light burners with the
cover on.
2.
Do not lean over the grill.
Push in and turn the grill control knob to "
3.
continuing to hold it in.
IMPORTANT: If burner does not light immediately, turn the
burner knob to " ○ " and wait 5 minutes before relighting.
Manually Lighting the Side Burner
1.
Open the hood completely. Do not light burners with the
hood closed.
2.
Do not lean over the grill.
3.
Remove the manual lighting extension (see the following
illustration) and attach a match to the split ring.
4.
Strike the match to light it.
5.
Hold the lit match close to the side burner.
Using Your Side Burner
Push in and turn the control knob to "
6.
closest to the lit match. The burner will light immediately.
When burner is lit. turn knob to desired setting.
", while
7.
Repeat steps 3 through 6 for each burner.
8.
Remove the match and replace the manual lighting
extension on the right side panel.
IMPORTANT:
If burner does not light immediately, turn the burner knob to " ○ "
and wait 5 minutes before relighting.
If any burners do not light after attempting to light them
manually, contact the Customer Service Center. See the
''Assistance'' section.
33
". For the burner

Publicidad

loading

Este manual también es adecuado para:

860-0028 lp860-0028 ng2127200