Buffalo FC258 Manual De Instrucciones página 4

EN
Operation
Connecting the head unit
The head unit is supplied as a single detachable part to aid
in cleaning the appliance.
To connect the body of the appliance with head unit:
1. Put the head unit onto the main body of the appliance,
using the pin (A).
2. Rotate the head unit until the safety switch (C) on the
bottom touches the pin (D) on the main body.
Using the timer
The digital timer with audible alarm can be set from 1 second to 15 minutes. The timer provides an
audible alarm only; after the set time expires unit will continue to operate at set temperature.
• START/STOP: Press START/STOP to start timer, press again
to stop. The timer will provide an audible alarm after the
set time. The alarm will beep 10 times and the display will
continue to flash until timer is reset (press the START/STOP
button).
• UP: Press UP to add extra time.
DOWN: Press DOWN to reduce time.
•
PROGRAM: There are a total of 6 programmable timer settings. The default factory program settings
•
are given below.
Program
Factory preset time
4
FC258_FC259_ML_A5_v3 20230616.indb 4 FC258_FC259_ML_A5_v3 20230616.indb 4
Safety switch
1 2
00:30 01:00 01:30 02:00 02:30 03:00
Timer
Power switch
Heat indicator
light
Thermostat
Thermal Cut-out reset switch
Element
3 4 5
Reset switch cover
6
2023/6/16 17:25 2023/6/16 17:25