Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Note: Failure to clean the appliance regularly may result in premature activation
of the thermal cut-out switch.
•
Remove the head unit for ease of cleaning.
•
Empty the oil to clean the appliance thoroughly.
Warning: Do not remove the oil pan until AFTER it has been emptied.
•
If the oil is to be reused then filtering it before refilling will extend the oil's cooking life.
•
Use a suitable detergent to clean the interior of the appliance.
•
Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
•
Dry thoroughly after cleaning, ensure there is no water left in the fryer.
Troubleshooting
A qualified technician should carry out repairs if required.
Fault
Appliance not
The unit is not switched on
working
Plug or lead is damaged
Fuse in the plug has blown
Mains power supply fault
Safety switch not located
properly
Appliance does
Faulty thermostat
not reach set
Faulty element
temperature
Build-up of fat on the element
Appliance heats up
Indicator light has expired
but indicator light
does not come on
Power indicator
Faulty element
light comes on but
Faulty thermostat
appliance does not
heat up
Thermostat set incorrectly
Appliance slow to
Faulty element
heat up
Build-up of fat on the element
Oil overheats or
Thermostat damaged
starts to smoke
No power
Thermal cut-out activated
6
FC258_FC259_ML_A5_v3 20230616.indb 6
FC258_FC259_ML_A5_v3 20230616.indb 6
Probable Cause
Solution
Check the unit is plugged in correctly and
switched on
Replace plug or lead
Replace the plug fuse
Check mains power supply
Refit head unit
Consult a qualified technician
Consult a qualified technician
Clean the appliance
Consult a qualified technician
Consult a qualified technician
Consult a qualified technician
Check thermostat
Consult a qualified technician
Clean the appliance
Switch off immediately. Consult a qualified
technician
Please check your machine is safe with no
obvious damage and then press the re-set
switch
2023/6/16 17:25
2023/6/16 17:25
Publicidad
