Setting The Language - Premier TEL-4736IL Manual De Instrucciones

(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [RING SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [INT RING] and press <OK>.
(5) Select the ringer tone you want, and then press <OK>.
6.2.3 Set Ringer Volume
You can change the ringer volume for all calls (no individual external and internal volume setting).
(1) Press <MENU> button or short press <Ringer> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [RING SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [VOLUME] and press <OK>.
(5) Use the <▲> or <▼> button to select volume value and then press <OK>.
6.3 Handset Key Beep
6.3.1 Set Key Tone
You can set the handset to make a beep whenever you press a key.
(1) Press <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [TONE SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [KEY TONE] and press <OK>.
(5) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
6.3.2 Set Battery Low Warning Tone
You can set the handset to play warning beep during battery level is low.
(1) Press <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [TONE SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [BATTERY LOW] and press <OK>.
(5) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
6.3.3 Set Out of Range Warning Tone
You can set the handset to play warning beep when handset unlinked to base unit.
(1) Press <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [TONE SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [RANGE ALARM] and press <OK>.
(5) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
6.4

Setting the Language

(1) Press <MENU> button.
P-10