Handset Settings; Alarm Function - Premier TEL-4736IL Manual De Instrucciones

emission and still can achieve immediate reaction. In other word, when handset in stand-by status, the
base unit is no RF emission.
To set the handset to normal DECT system or Zero Emission
(1) Press the <MENU> button.
(2) Use the <▲> or <▼> button to scroll to [BS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [NEMO] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
Notice : It has a drawback on NEMO mode that the handset cannot detect out of range at stand-by
status.
5.6 RESET OF THE BASE
This will undo all changes and set back all default settings (flash timing, Tone dialing etc.)
(1) Press the <MENU> button.
(2) Use the <▲> or <▼>
(3) Use the <▲> or <▼>
(4) Enter the PIN code and press <OK>

6 HANDSET SETTINGS

6.1

Alarm Function

You can use handset as an alarm clock to wake you up by defined time.
(1) Press <MENU> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [ALARM] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [ON] and press <OK>.
(5) Use the <▲> or <▼> button to enter hours in 24 hour format and press <OK>.
(6) Use the <▲> or <▼> button to enter minutes and press <OK>.
(7) Use the <▲> or <▼> button to turns snooze on or off and press <OK>.
6.2 Handset Ringer Tone
6.2.1 Set External Call Ring Tone
You can change the ringer tone for an incoming call (external)
(1) Press <MENU> button or press and hold <Ringer> button
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>.
(3) Use the <▲> or <▼> button to scroll to [RING SETUP] and press <OK>.
(4) Use the <▲> or <▼> button to scroll to [EXT RING] and press <OK>.
(5) Select the ringer tone you want, and then press <OK>.
6.2.2 Set Intercom Ring Tone
You can change the ringer tone for Intercom call (internal).
button to scroll to [BS SETTINGS] and press <OK>.
button to scroll to [BS DEFAULT] and press <OK>.
P-9