Phonocar VM488 Manual De Instrucciones página 9

APP APPLE: Phonocar WI-FI rear camera
6
1) Camera image.
2) Recordings made.
3) W-FI Red = camera in connection.
WI-FI Green = connected camera.
WARNING: The Apple device must be renamed. Enter your smartphone settings then select "General" and then
"Info". Press "name" and change the name to: Rear Wifi Camera. In the settings select PERSONAL HOTSPOT,
activate it and enter the wi-fi password: 12345678. Then, you can customize USER and PASSWORD, through
the HOTSPOT SETTING.
Note: Remember to save your SSID and PASSWORD settings because you cannot reset the system (RESET)
or change the settings without re-entering the previously stored SSID and PASSWORD.
APP iOS
EVENT
Opening PHONOCAR APP
Ignition-key activation
Reverse gear Engagement
PHONOCAR APP in background
PHONOCAR APP closed
PHONOCAR APP reopened
OUT FROM THE VEHICLE
WI-FI AND HOTSPOT CONNECTIONS
The HOTSPOT function cannot be used at the same time as the WI-FI because the smartphone is supposed to
create the connection with the camera. It will therefore not be possible to connect to any Access Point, Router or
other WI-FI device during the use of the rear camera, but 3G for data transmission will remain in operation.
1
4
2
3
4) Return to the previous screen.
5) Delete records.
6) HOTSPOT SETTING: It is possible
to customize USER and PASSWORD
PHONOCAR WI FI REAR CAMERA"
APP STORE: "
HOTSPOT CAMERA FUNCTION
Timer Activation and switch on of the camera router
The smartphone connects to the camera.
The WI-FI function is deactivated (if it was active).
If the connection is not yet active, the device
continues the research. If, instead, it is already connected it waits for
the engagement of the reverse gear (the APP must ALWAYS remain
open to receive images. )
The camera sends the image to smartphone.
At the same time static guidelines will be displayed.
The smartphone keeps HOTSPOT active but to receive the rear image,
it is necessary to reopen the APP, when the reverse gear is re-activated.
By completely closing the APP on your smartphone, it
continues to remain connected via HOTSPOT, and when the APP
reopens the smartphone will be ready to receive the images.
The smartphone remains in "ready to reverse gear".
The WI-FI function is deactivated (if activated).
The system remains on for 60 minutes after having closed the
ignition-key , so as to maintain the possibility to connect your
smartphone if it is within range of the camera (approx. 10 meters).
In this way, activation times of the system are reduced.
After 60 minutes, the system switches off.
9
5
GB