aquatechnik BST 32 PLUS Instrucciones De Uso página 40

5. Press the advance button (B) until the flare is created (the pipe will automatically disengage
from the tool when the operation is complete).
The Pipe Flaring Machine BST 32 PLUS will automatically return to its resting position.
CAUTION
6. Engage the fitting into the resulting flare by pushing up to the stop.
7. Screw the cap up to the anti-loosening safety notch (use a 50600 series spanner).
CAUTION
to the anti-loosening system.
SAFETY
INSTRUCTIONS
SAFETY
INSTRUCTIONS
40
STEPS FOR CREATING FLARES WITH REUSABLE EXPANDER
NB: the time required for automatic reset is 4-5 seconds.
NB: any removal of the fitting is achieved by releasing the cap using
the fixed spanner. DO NOT REUSE caps that are already secured up
Replace the reusable expander (F) when the pipe has difficulty entering
(fig. 5) or when it is worn (after approx. 500 flares).
Allow the device or rechargeable battery pack to cool.
PROCESSING REMARKS
Use the support
The Pipe Flaring Machine BST 32 PLUS is provided with a suitable sup-
port (O), which can be used as tool support when working on a bench,
and as support when one should use it on a site.
(fig. 6a)
Bench processing
Place the support ring (O, fig.6a) on the Pipe Flaring Machine BST 32
PLUS tank and tighten the special screw (fig. 6b). The special shape of
the support locks the equipment in a balance condition preventing it
from falling and comfortably allows for bench processing on any work
surface.
(fig. 6b)