aquatechnik BST 32 PLUS Instrucciones De Uso página 44

To clean the device, use a cloth lightly moistened with a standard, non-aggressive detergent.
SAFETY
INSTRUCTIONS
For the proper operation of the Pipe Flaring Machine BST 32 PLUS, we recommend two-yearly
servicing at the Aquatechnik workshops.
Any work on the Pipe Flaring Machine BST 32 PLUS must be carried out in Aquatechnik work-
shops; tampering with the device or any of its components shall render the warranty null and void.
In the event of considerable oil leakage from the device, return the Pipe Flaring Machine BST 32
PLUS immediately to Aquatechnik for inspection and repair.
WARNING
Do not allow the equipment to get wet; water and liquids in general can damage electrical circuits.
Shipment of rechargeable lithium ion battery packs is subject to the dangerous goods regulations
(UN 3480 and UN 3481). For the shipment of rechargeable lithium-ion battery packs, please
enquire about the regulations currently in force. Ship rechargeable battery packs only when the
housing is intact and not showing any signs of leakage. Discharge the rechargeable battery pack
inside the power tool and remove the rechargeable battery pack from the device for shipment.
Protect contacts against short circuits (e.g. by insulating them using electrical tape).
Regularly lubricate the quick coupling device on the extractor with oil.
WARNING
44
MAINTENANCE
DO NOT USE acids, thinners, solvents or powdered substances, which may
damage the components.
Caution: prevent spilled oil from coming into contact with skin or
eyes. Do not inhale or ingest. Do not disperse in the environment.
Caution: before carrying out any maintenance, remove the battery
from the device and ensure that the equipment is disconnected from
power sources (battery or power socket).
1. Pull out the removable head
Front view
2. Lubricate
Cross section