Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
•
Take the sculpture out of the packaging and place it on the cleaned floor.
Place some fabric underneath to protect the surface of the sculpture from
dust, sand, pine needles, etc.
•
Make sure that the zip at the bottom of the sculpture is closed.
•
Make sure that the fan at the bottom is not blocked or obstructed by the
fabric pad or other things.
•
Connect the cable from the fan to the connector on the power supply unit
and plug it into a household socket.
Note: The mains adapter is protected against splashing water (IP44). It
should nevertheless be housed in the dry. With an appropriately secured
outdoor multiple socket outlet, this precautionary measure is not
necessary
•
Secure the Christmas decoration (similar to a tent) with pegs in the
ground. Use the nylon cords to anchor the sculpture to these or to other
fixed objects, such as fence posts.
•
To replace a defective bulb, open the zip and replace the defective bulb
with an identical product. Make sure to disconnect the unit from the mains
beforehand.
EN
11
Publicidad
