Fronius Exento LowVac Serie Manual De Instrucciones página 53

• mixed with liquids and the resulting contamination of the air flow with
vapours containing aerosols and oils;
• mixed with highly flammable, combustible dust and/or with substances
that can form explosive mixtures or atmospheres;
• is mixed with other aggressive or abrasive dust that could damage the
product and the filter elements employed;
• is mixed with organic, toxic substances or a proportion of substances
that are released when cutting the material.
2. Outdoor locations where the product is exposed to weather conditions
because the product must only be installed in closed buildings.
If there is an outdoor variant of the product available, this may be
installed outside. Please note that additional accessories may be
required for the outdoor installation.
3.6 Markings and signs on the product
Various markings and signs are affixed to the product. If these are
damaged or removed, please replace them immediately with new ones in
the same location.
The operating company is obliged to post further markings and signs on
the product and the surrounding area if necessary.
Such notes and signs might be related, for example, to the requirement for
wearing personal protective equipment.
In the country of use, additional required safety instructions and
pictograms can be provided by the manufacturer in accordance with
applicable law.
3.7 Residual Risk
Even when all safety rules are observed, when operating the product a
residual risk remains, as described below.
All persons working on and with the product must be aware of these
residual risks and follow the instructions that prevent these residual risks
from causing accidents or damages.
42,0410,2736-00; 1502940-00 - 53 -
EN