Publicidad
Idiomas disponibles
Idiomas disponibles
2
VALVE ASSEMBLY
• Remove PLASTER GUARDS.
• Thread INSERT (1) into SIDE VALVE (2) until it touches
the installation surface.
• Thread INSERT (3) into SIDE VALVE (4) until it touches
the installation surface.
• Tighten COUPLING (5) into TEE (6) for products
without hand shower.
3
INSTALL HANDLES
• Turn VALVE to OFF position.
• Push ADAPTER (1) on VALVE STEM (2), so that the hole of the ADAPTER (1) without a spline is facing up. Fig. A.
Tighten STEM SCREW (3) to secure ADAPTER (1).
• Align DECK ADAPTER (5) to LEVER HANDLE ASSEMBLY (4). Push LEVER HANDLE
ASSEMBLY (4) onto DECK ADAPTER (5) firmly to flush against mounting surface.
Fig. A.
SPLINE END DOWN
FITTING
MOUNTING
DECK
VALVE
LOCKING
TOP
3
- 2 -
1
SPOUT
SHANK
HOT
2
4
1
2
5
3
VALVE
LOCKING
COLD
4
6
5
M965957 Rev. 1.1 (3/22)
Publicidad
