Descargar Imprimir esta página

Ryobi PCL813 Manual Del Operador página 7

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE POWER CORD
See Figure 3, page 9.
NOTE: Use the included power cord adaptor only with the
RYOBI
PCL813 Fan.
„ Place the speed switch in the OFF ( 0 ) position.
„ Insert the female end of the power cord into the product
as shown.
„ Connect the male end of the power cord to the power
source.
„ Make sure the power cord is secured before beginning
operation.
STARTING/STOPPING THE PORTABLE FAN
See Figure 4, page 9.
WARNING:
Hybrid tools are always in operating condition. Therefore,
switch should always be in the OFF ( 0 ) position, when
not in use.
„ Connect the fan to an AC or DC power supply.
„ To start the fan, turn the speed switch clockwise and
select the desired speed.
„ The speed switch has four settings:
0 - Off
3 - High
2 - Medium
1 - Low
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
NOTE: ILLUSTRATIONS START ON PAGE 8
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
OPERATION
„ To stop the fan, turn the speed switch counterclockwise
to the OFF ( 0 ) position.
HANGING THE PORTABLE FAN WITH THE
MOUNTING HOLE
See Figure 5, page 9.
NOTE: Be careful not to hang the fan in such a way that it
prevents normal fan operation or damages the cord.
„ Use a #12 x 3 in. minimum screw size for mounting the
fan.
„ Ensure that the screw is securely fastened into a stud.
„ Slide the mounting hole, located on the frame, over the
screw. Make sure the fan is securely mounted.
ADJUSTABLE HEAD
See Figure 5, page 9.
To change the angle of the fan head, loosen the adjustment
knob on each side of the fan head. Select the desired posi-
tion and tighten each knob to secure.
NOTICE:
Adjusting the fan head without loosening the adjustment
knobs could result in damage to the fan.
MAINTENANCE
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
7 – English

Publicidad

loading