Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO USE YOUR BLENDER (SAUCEPAN BLENDING)
1. Take the pan off the heat and let it cool slightly. Otherwise your hand blender
could overheat.
2. Fit the power handle (C) inside the blender shaft (D) turn and lock.
3. Plug in. To avoid splashing, place the blade (E) in the food before switching on.
Note: Do not immerse past one inch below the air vents on the power handle. (See
number 2 in the diagram.)
4. Hold down either the low-speed (I) or high-speed (II) buttons depending on the
desired result. (Unit shuts off as soon as buttons are released.)
5. Move the blade through the food and use a slow up and down action.
6. If your blender gets blocked, unplug before clearing.
7. After use, unplug and dismantle.
AFTER YOU'RE FINISHED
1. Disconnect plug from electrical socket (Electrical Safety, Steps 3, 8).
2. Repeat "Getting Started" steps 2 and 3.
3. Fight off the temptation to make another tasty smoothie.
TROUBLESHOOTING
Don't operate your blender under the following circumstances:
•
When the cord or its plug is damaged.
•
After the hand blender has malfunctioned.
•
If the immersion blender has been dropped or damaged in any way.
TECHNICAL SPECIFICATIONS
•
2 Speeds
•
Soft Grip Buttons
•
Contoured Grip Handle
•
Stainless Steel Blade
•
Motor rating: 200W
•
120V AC @60Hz
CONTACT TECHNICAL SUPPORT
Web: www.courantusa.com
Email: support@courantusa.com
Phone: +1 888-943-2111
–5–
Publicidad
