Descargar Imprimir esta página

GE 25 Manual Del Propietario E Instalación página 16

Ocultar thumbs Ver también para 25:

Publicidad

Idiomas disponibles

Idiomas disponibles

About the ice and water dispenser.
Spill Shelf
16
To Use the Dispenser
Select CUBED, CRUSHED or WATER.
Press the glass gently against the top
of the dispenser cradle.
The spill shelf is not self-draining. To reduce water
spotting, the shelf and its grille should be cleaned
regularly.
If no water is dispensed when the refrigerator is
first installed, there may be air in the water line
system. Press the dispenser arm for at least two
minutes to remove trapped air from the water line
and to fill the water system. To flush out impurities
in the water line, throw away the first six glassfuls
of water.
CAUTION: Never put fingers or any other objects
into the ice crusher discharge opening.
Locking the Dispenser
Press the LOCK or LOCK CONTROLS pad for
3 seconds to lock the dispenser and control panel.
To unlock, press and hold the pad again for
3 seconds.
Dispenser Light
The LIGHT pad turns the night light in
the dispenser on and off. The light also comes on
Quick Ice
When you need to speed up ice production, use
the Quick Ice feature. While this feature is turned on,
the freezer fan runs continuously for 48 hours, or
until the feature is turned OFF. During this period,
ice production will increase up to 40%. Models with
the integrated ice feature system require at FIRST
USE at least half an 8 oz. glass of ice to be dispensed
every 6 to 12 hours. This will help the icemaker fill
the bucket properly so that dispensing is better.
Precise Fill
(on some models)
This water dispenser is equipped with a feature
called "precise fill." This feature allows you to
choose a precise amount of water (cups or
ounces) that you would like dispensed. Pints
and Liters are also available for LCD models.
LCD Models
Access By: Home > Options > Dispenser Options >
Precise Fill > Set Amount
Activate By: Using the arrow buttons to select
the desired amount. Press MORE UNITS to select
between CUPS, OUNCES, PINTS or LITERS.
If you selected OUNCES, press the
to select the number of ounces you would like
to have dispensed between 2–99 ounces.
The default is 8 ounces.
(on some models)
when the dispenser cradle is pressed. For models
with a bulb, if the light burns out, it should be
replaced with a 6 watt 12V maximum bulb.  For
LED models, contact Factory Service.
Door Alarm
Use Door Alarm to sound if either door is open
for more than 3 minutes. The alarm will stop
once the door is closed. For LCD models, a popup
screen will appear. The alarm can be silenced
by touching the LCD screen.
LCD Models:
Access By: Home > Options > Information and
Settings > Settings > Door Alarm
Access By: Pressing ON.
Deactivate By: Pressing OFF.
How to Use
LCD Models:
Access by: Home > Options > Freezer Options >
Quick Ice
Activate by: Pressing ON.
Deactivate by: Pressing OFF.
If you selected CUPS, press the
to select the amount you would like to have
dispensed. They are displayed as 1/4, 1/3, 1/2, 2/3
and 3/4, with the highest amount being 16 3/4
cups. The default is 1 cup.
Press the cup against the cradle and water
will begin dispensing. It will automatically stop
when the amount set has been dispensed.
The display will show the amount of water
dispensed, beep, then reset after 5 seconds.
NOTE: Do not leave the dispenser unattended
when water is being dispensed.
or
pad
If you would like to stop dispensing water
before the specified amount has been
dispensed, just remove the cup from the
cradle. The display will show the amount that
has been dispensed for 5 seconds. If the cup
switch is pressed again within that time, the
dispenser will continue up to the set amount.
If not, the display will return to the set
amount.
GEAppliances.com
or
pad

Publicidad

loading

Este manual también es adecuado para:

2322262729