GE 25 Manual Del Propietario E Instalación página 7

About CustomCool
LCD Models Only
ExpressThaw
™
ExpressChill
™
.
™
(on some models)
R O
EFRIGERATOR PTIONS
C C
USTOM OOL
P
AN
B
EVERAGE
C
ENTER
B
ACK
LCD Models Only
How it Works
The CustomCool feature is used to quickly
™
chill items, thaw items or hold the pan at a
specific temperature. This feature is a system
of dampers, a fan, a temperature thermistor
and a heater.
How to Use
Empty the pan. Place the Chill/Thaw tray
in the pan. Place the items on the tray
and close the pan completely.
LCD Models:
Access by: Home > Options > Refrigerator
Options > CustomCool Pan
ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.
To stop a feature before it is finished:
For LCD Models:
Go into that feature's menu and press
the OFF button.
How to Remove and Replace the Drawer
To remove:
Pull the drawer out to the stop position.
Rotate all four swing locks to the unlock
position.
Lift the front of the drawer up and out.
To replace:
Make sure all four swing locks are in
the unlock position.
Place the sides of the drawer into
the drawer supports, making sure
the swing locks fit on the drawer slots.
T C
URBO OOL
The pan is tightly sealed to prevent
temperature fluctuations in the rest of
the refrigerator. The controls for this pan
are located on the dispenser with the
temperature controls.
NOTE: For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThaw.
This will help contain meat juices and improve
thawing performance.
Lock all four swing locks by rotating them
to the lock position.
GEAppliances.com
During ExpressThaw and
ExpressChill,the display on the
controls will count down the time
in the cycle (on some models).
After the ExpressThaw cycle is
complete, the pan will reset to the
MEAT setting (32°F [0°C]) to help
preserve thawed items until they
are used.
The displayed actual temperature of
the CustomCool pan may vary slightly
from the SET temperature based on
usage and operating environment.
7