Ecowell LULU Quick Clean P05 Manual De Usuario página 10

Assemble Roller
Please align the groove on the right
side of the roller with the drive shaft,
and then press down on the left side
of the roller until it is installed in
place.
1
2
Unscrew the cap, and inject tap
water (under 40°C/
water level. Close the cap of the
clean water tightly to make sure it is
tight and not loose.
8
PRODUCT OPERATION
Clean Water Tank
Release
) to the max
104℉
Assemble Roller Cover
First align the snap of the roller
cover, then press the roller cover
and hear a "click" to install
successfully.
To remove, hold the fuselage with
one hand, grasp the clean water
tank groove and clean water tank
release with the other hand and
pull back.
3
Align the bottom of the clean water
tank with the groove and push the
tank until it "clicks" into place.
EN