4
Before use, please make sure your
product is powered. If not, please
charge it in time (refer to ➇ and ➈
for details), and use it after fully
charged.
6
Tilt the angle properly.
Pull the machine backwards to start
using it. Stand the machine upright.
5
Press the power button to turn
on. Switch ECO/MAX mode
according to floor conditions.
Tilt the angle properly.
7
Press the button once during
work, and the roller starts large
gear spraying water. Press this
button again, to return to the
default water volume.
Notice: The button can only be
used if the wet function on.
EN
9