Descargar Imprimir esta página

Ruby TIBER 100 Manual De Instrucciones página 45

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
Automatic Defrost Feature
The unit is equipped with an automatic defrost feature. When room temperature is too low, compressor
shuts off and unit runs on high fan speed setting until the frost has disappeared, no other setting can be
made for this feature. During defrosting cycle, dysplay shows F.
Memory Feature
When power failure and after recovering, the unit will work with the mode prior to the shutdown. Means
the humidity setting and working mode setting will be kept.
Continuous Drainage Option
Continuous drainage option allows easy removal of collected water instead of manually emptying from
the water tank when the environment is very high humidity.
1. Press Manual button to select the desired humidity value of CO.
2. Remove the rubber plug covering the drain hose connection.
3. Connect a suitable drain hose (14 mm inner diameter) through the drainage outlet. Ensure that the
hose is secure and tight to prevent leakage.
4. Always make sure the drainage hose is not blocked or obstructed to maintain a smooth fl ow.
Drainage Pipe
45

Publicidad

loading

Este manual también es adecuado para:

Tiber 130