Descargar Imprimir esta página

EVVO F45 Retro Serie Manual De Instrucciones página 16

Mini frigorífico 2 puertas

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Freezer compartment
2. Temperature knob
3. Light switch
4. Shelf
5. Drain plug
6. Drawer cover
7. Drawer
8. Door shelves
9. Bottle holder
Note:
The graphics in this manual are schematic representations and may not exactly
match the appliance.
2. BEFORE USE
- This appliance is packaged in a way as to protect it during transport. Take the
appliance out of its box and remove all packaging materials. You can keep the original
box and other packaging elements in a safe place. This will help you prevent damage
to the appliance when transporting it in the future. In case the original packaging is
disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is
any piece missing or in bad conditions, contact the official EVVO Technical Support
Service immediately.
3. INSTALLATION
Installation
1. Place the refrigerator on a completely flat surface. Leave 5~10 cm between each side
of the appliance and the wall, and 30 cm between the top of the appliance and the
ceiling.
2. Choose a place that is not exposed to sunlight, high temperatures, or humidity, as
moisture can cause stains.
3. Remove the bottom panel before installation.
4. The appliance can be adjusted via its two front support feet. You can raise the
appliance by turning them clockwise.
5. Choose a solid and flat surface for installation. Improper levelling and installation
16
EVVO FRIGORÍFICO MINI 2 PUERTAS F45 RETRO RED/BEIGE/BLACK/BLUE/GREEN

Publicidad

loading

Este manual también es adecuado para:

V0251V0252V0253V0254V0255