Gree Versati II Manual De Usuario página 11

Air-to-water Heat Pump Monobloc Versati
6 Installation Example
CASE 1: Connecting Heat Emitters for Heating and Cooling(Under floor loop,Fan Coil
Unit,and Radiator)
Note:
① The two-way valve is very important to prevent dew condensation on the floor and Radiator
while cooling mode;
② Type of thermostat and specification should be complied with installation of this manual;
③ The Bypass valve must be installed to secure enough water flow rate, and should be installed at
the collector;
CASE 2: Connecting Sanitary Water Tank
9