monzana DBSH001 Manual De Instrucciones página 13

TECHNICAL DATA
Model
Display area
Cassette size
Arc sensor
UV/IR protection
Brightness level
Darkness level
Sensitivity control
Switching time
Delay control
Power supply
TIG AMP evaluation
Operating temperature
Storage temperature
Welding functions
ADF self-check
Low battery display
Welding function
TROUBLESHOOTING
Problem(s)
The view is
impaired by the
filter
Filter does not get
darker when an arc
is struck
Filter darkens
without arc
Sensitivity set to
HIGH
MAINTENANCE AND CARE INSTRUCTIONS
Check all the parts for signs of wear. Do not continue to use the product if you find any defects.
Only have parts replaced with original spare parts by a specialist in accordance with the
manufacturer's specifications. A lack of care and maintenance can damage the appliance.
Dangerous situations can arise. Regular maintenance helps to ensure the safety of the product
and increases its service life.
DBSH001
93*43mm
110x90x9
2
Any time to colour tone DIN 9-13
DIN 4
Variable colour tone DIN 9-13
Variable adjustable using internal rotary knob
0.1-1 s
0,1-1.OS, continuous adjustment knob, from dark to light
Solar cell and rechargeable lithium battery 1x CR2450
DC>10, AC>10
-5°C to +55°C
-20°C to +70°C
Yes
Yes (TEST button)
Yes (red LED)
MMA, MIG/MAG, TIG
possible cause(s)
Closing lens dirty
Filter lens dirty
Welding or cutting mode
selected
Set colour tone between 9 and
13
Sensors or solar panel locked.
Ensure the sensors or solar
panel are exposed to the
welding arc without blocking it
Filter darkens without arc
Sensitivity set to HIGH
Solution(s)
Clean or swap closing lens
Clean filter lens
Welding or cutting mode selected
Set colour tone between 9 and 13
Sensors or solar panel locked.
Ensure the sensors or solar panel are
exposed to the welding arc without
blocking it
Filter darkens without arc
Sensitivity set to HIGH
13 www.DEUBAXXL.de