ION Plunge iSP56 Guia De Inicio Rapido página 6

6. Power On/Off Switch: Press and hold this button to turn Plunge on/off. While Plunge is
connected to a power source, it does not need to be powered on to charge the battery.
Note: Plunge will power off after 10 minutes if there is no Bluetooth connection or no
audio signal being received.
7. Charging Indicator: The LED will slowly blink when the battery needs charging. The LED
is solid red when the battery is charging. When the power is on and the battery is fully
charged, this LED will be solid green.
8. Volume Up: Press this to increase the speaker volume on Plunge.
9. Volume Down: Press this to decrease the speaker volume on Plunge.
Note: Press the Volume Up and Volume Down buttons at the same time to enable or
disable voice prompts.
10. Next Track: Press and release this button to skip to the next Bluetooth track. Press and
hold this button for 2 seconds to enable your connected smartphone's voice assistant
®
(e.g. Siri , Google
11. Previous Track: Press and release this button once to go to the beginning of the track.
Note: With some apps, pressing the Previous Track button or Next Track button may
go to another playlist or music genre.
12. Microphone: Talk into this after receiving a call.
13. Tripod Mount (bottom panel): Attach a tripod to this 1/4" (6.35 mm)
threaded mount.
Pairing or Disconnecting a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Plunge and it will automatically go into pairing mode to search for Bluetooth
devices. You will know you are in pairing mode when the Bluetooth icon is slowly
flashing.
3. Navigate to your Bluetooth device's setup screen, find "Plunge" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
4. Press and release the Bluetooth button to disconnect a paired Bluetooth device.
5. To connect to another Bluetooth device, repeat step 3.
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
®
, etc), and then speak into the microphone.
6
13 13