Descargar Imprimir esta página

Miniland digital camera 4.3' pro Manual Del Usuario página 15

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
7. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Camera not turned on.
Monitor not turned on.
Camera: not plugged in to the
power adapter.
No reception on
The camera has no battery.
the monitor.
Monitor: The power adapter is not
plugged.
Monitor out of range.
Connection lost between the
monitor and a camera already
linked.
A wrong camera has been selected.
Unable to charge
the battery to the
AC/DC adapter is not plugged in.
parent unit.
Only black and
Check whether the camera is in
white images are
night vision/infrared mode.
displayed.
The camera does
The camera has no battery.
not turn on.
The camera has not been turned on.
Camera: power adapter not
plugged in.
The camera is not
transmitting.
VOX mode or standby mode is
activated.
The camera has no battery.
The camera battery
The AC/DC adapter is not
cannot be charged.
plugged in.
Other electronic devices may be
interfering with the signal.
The camera and monitor may be
Interference or
too far apart.
unsatisfactory
reception.
The battery charge level may be
too low.
The camera or monitor may be too
close to many metal objects.
SOLUTION
Press the on / off button (I) and keep pressing
for at least 2 seconds.
Press the on / off button (1) and keep pressing
for 4 seconds.
Plug in the power adapter.
Plug in the power adapter.
Plug in the power adapter.
Pull out the monitor aerial and if it is still out of
range, bring the monitor closer to the camera.
Extend the antenna (15) of the monitor, and in
case it is still out of range move the monitor closer
to the camera. Check section: 5.2.4.
Change the camera number you are watching.
See 5.2.6.
Plug in the power adapter.
In order to view the images in colour, increase
the level of light in the room the camera is in or
check there is nothing covering the camera´s light
sensor (II).
Plug in the power adapter.
Press the on / off button on the camera (I) and
keep pressing for 2 seconds.
Plug in the power adapter.
To view the monitored area continuously, switch
off the VOX mode or power saving mode on
the monitor.
Plug in the power adapter.
Plug in the power adapter.
Move them away from the device.
Extend the antenna (15) of the monitor, and
in case it is still out of range move the monitor
closer to the camera.
Plug in the power adapter.
Move them away from the device.
15
ENGLISH

Publicidad

loading

Este manual también es adecuado para:

89508