Publicidad
Idiomas disponibles
Idiomas disponibles
3. Installation method
NOTE: Put on a flat surface. Be careful not to distort the
back plate of the wire controller by overtightening the
mounting screws.
4. Battery installation
Put the battery into the installationsite and make sure the positive side
of the battery is in accordance with the positive side of installationsite.
(See Fig.3-5)
Please set the time corrected on the first time operation. Batteries in
the wire controller can time under power failure which ensure the
time keep right. When the power restores, if the time displayed is not
correct, it means the battery is dead and replace the battery.
Fig 3-5
6
V.1
Publicidad
