Publicidad
Idiomas disponibles
Idiomas disponibles
3. WARNING SYMBOLS
Warning labels indicate required information for the
use of the machine.
Warning and care.
Do not let people enter in the
work area. This area will be of a
diameter of 15 meters from the
point in which you are working.
Use protective non skid boots with
protective steel.
Use appropriate security gloves.
It is necessary to use eye and acoustic
protection at any time.
It is necessary to read this manual
carefully before using this machine.
Attention!: Do not touch the cutting blade.
Attention!, Danger!: The cutting tool can
project hard objects.
Be careful not to hit anything when
turning.
Keep people away from work area.
Caution! Hot Surface.
32/100 - English
Do not smoke or bring a flame to the
combustible or the machine.
Complies with EC Directives.
Guaranteed level of sound power Lwa,
Db(A).
XX
4. MACHINE SYMBOLS
In order to ensure safe operation and maintenance of
the machine are the following symbols in the machine.
Fuel tank. Located in the combustible
tank cap. Mix 2 stroke oil and gasoline.
Air positions:
CHOKE: Normal operating position.
cold start
Located in the top of the filter.
normal
RUN: Position for starting the
operation
machine in cold. Located on the of air
filter cover.
Positions start switch located on the right
handle of the machine.
"O"= Off (The machine don´t work)
"I"= On (The machine is ready to work)
Never use only fuel or fuel in a bad
state. Mix unleaded fuel grade 95 and
synthetic oil for 2 stroke engines to
2.5% (40:1).
SMASH BCG50
Publicidad
